+ Easy Mode Evolution makes it even easier to use. Maximum tightening torque (N · m): 180. Tightening capacity (mm) Small screw: M4 M8, bolt: M5 M16.
High strength bolt: M5 M14, Course thread: 22 125mm. Rotation speed (rotation / min) Fastest. 0 to 3600 / strong: 0 to 3200 / medium: 0 to 2100 / weak: 0 to 1100 / wood: 0 to 1800 /. 0 to 3600 / for tex (thin plate): 0 to 3600 / for tex (thick plate): 0 to 3600. Number of hits (times / min) Fastest.0 to 3800 / strong: 0 to 3600 / medium: 0 to 2600 / weak: 0 to 1100 / wood: 0 to 3800 /. Bolt (For forward use): 0 to 3800 / for tex (thin plate): Stop immediately after batting / for text (thick plate): 0 to 2600. Overall length (head part length, mm): 116. Mass (kg): 1.5 Battery: BL 1860 B not incl.
Double ball bearings are adopted for bearing parts! It greatly reduces the runout when using a long bit, and it has durability that is strong against the harshness at the time of tightening. Various modes available in the scene. Batting mode + Raku 4 modes. Strike mode 4 step change: fastest · strong · medium · weak.
Supports from tightening of power. Speed preferential tightening to delicate tightening such as small screws. Wood mode: Start slowly slowly.
With trigger fully open, fasten with automatic speed change fastest at a stretch. Bolt mode For normal rotation: Instantaneously fastest with trigger ON. Reverse rotation: When the nut loosens, automatic stop. Text mode (Thick plate mode): Reduce screw head skipping and coming out. Text mode (thin plate mode): Automatic stop after detection of blows after screw penetration.
Batting Mode Switching Hand Button. Switching the batting mode while holding the grip. Fastest strong medium weak fastest.
One mode you use frequently can be registered. If you press the hand button, you can quickly switch between the mode you were using just before and the mode you registered! Two left and right LED light attachment.
It is difficult to be bitten or scratched like a bit or a screw. Quick charger (DC 18 RF): New and optimum charging control shortens charging time!
Battery status during charging · Ambient temperature etc. Are further reflected in charge control.
Practical charging (up to about 80% or more): about 27 minutes / full charge (100% full charge): about 40 minutes. Caution Only for mark battery. Smartphone or the like can charge (USB). Large capacity small item storage with storage.Simply lock the lid by raising the handle. Prevent erroneous opening of lid with base claw. Dust proof and drip-proof specification (APT). The best Makita impact driver is the Makita DTD171Z.
What makes it the best Makita impact driver? It is the most powerful and feature rich impact driver from Makita. It has the most torque at 180Nm, brushless motor and has adjustable 4 speed settings for different applications. The DTD171 is the newest impact driver from Makita. Previous models do not have as much torque and lack the adjustable 4 speed settings for different applications.This is the best impact driver from Makitas UK range. Makita Impact Driver: DTD171 (Best Makita Impact Driver).
Latest Makita Impact Driver in 2021. Impacts per Minute: 3,800. Max No Load Speed: 3,600 rpm. This is currently the most powerful Makita impact driver, it has more torque than its predecessor, powerful brushless motor, twin bright LED lights and the bearings inside this tool, has been upgraded from needle bearings to ball bearings, to minimise chuck wobble, especially with long bits.This Makita power tool comes with some new functions, it has a control panel that allows you to adjust this impact driver to some very handy pre-settings. There is a 4 stage assist mode which does the following. Assist Mode for Wood Applications When driving into wood, it starts off slow to help avoid the screw from falling or screw cam-out at the beginning of the driving, and gives you more control. Once the tool has to use the impact function, the speed increases to maximum capacity. Bolt Mode This mode is to stop bolts and nuts falling off. In reverse it has an auto stop feature, it detects when the bolt is loose, and stops before the bolt is about to fall off, this stops it from falling off and dropping on the floor. T-Mode 1 This is for driving self-drilling screws into thin metal sheets. This mode drives the screws at high speed, then stops when the impact function is required. T Mode 2 This mode is for driving self-drilling screws in to thicker metal plates.
It does the same as Mode 1, but uses enough power to make sure the screw does not break or strip. The DTD171 has the following 4 pre-set speeds. No Load Speed: 3,600.Impacts Per Minute: 3,800. No Load Speed: 3,200. Impacts Per Minute: 3,600. No Load Speed: 2,100. Impacts Per Minute: 2,600. No Load Speed: 1,100. Impacts Per Minute: 1,100. The DTD171 impact driver comes with a quick mode switch function button above the trigger, this allows you to quickly switch between two modes on the control panel. If you are doing repetitive work, and using two of the modes often, rather than using the control panel, you can program that button above the trigger to switch between the two modes you require. The item "MAKITA TD171 DZ Color Brush less LXT 18v Impact Driver Double LED Best World Mod" is in sale since Friday, July 9, 2021. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Impact Drivers". The seller is "dimdim_tcxz1" and is located in Pinner. This item can be shipped worldwide.